6-Channel Running Light

The circuit of the running light comprises two integrated circuits (ICs), a resistor, a capacitor and seven light-emitting diodes (LEDs), Decade scaler IC2 ensures that the LEDs light sequentially. The rate at which this happens is determined by the clock at pin 14.

Circuit diagram :

6-Channel Running Light-Circuit Diagram

6-Channel Running Light Circuit Diagram

The clock is generated by IC1, which is arranged as an astable multivibrator. Its frequency is determined by R1-C1.

The touch switch, consisting of two small metal disks is optional. When switch S1 is in position ‘off ’, the circuit may be actuated by the touch switch. By the way, this enables the circuit to be used as an electronic die (in which case the LEDs have to be numbered from 1 to 6).

The running light is powered by a 9 V battery or mains adaptor. It draws a current not exceeding 20 mA.